This In-Line Full Pair Drop wire connector is a versatile connector for splicing different types of Drop wires.
The connector accepts copper or copper coated steel conductors having diameter from 0.9 mm to 1.3 mm, with max insulation of 4.4 mm, but min of 2.5 mm.
Encapsulated with sealant, the connector offers excellent environmental resistance.

UD4 C1

The clear transparent body and cover offers visual inspection of wire positioning before crimping.
Designed with pre-crimp feature to helps to hold the wires in place before final crimping.
 

UD4 C2

  Features

• The In-Line Full pair connectors are designed to accept self supporting Drop wire pair cables.

• The connectors are designed and built around industry standard Insulation Displacement Connection (IDC) technology.

• Robustly designed the connector has superior mechanical properties.

• A single crimp displaces the insulation and provides a cold solder equivalent connection, delivering low contact resistance.

Teklite™ In-Line Splicing Connectors

TC 017 Series UY4 C—The Most Versatile Full Pair Wire Connectors in the Copper Cable Network System.
 

Download In-Lineconnector PDF

The Teklite™ In-Line splice wire connectors are the most versatile in application and usage.
The connectors are designed and built around proven Insulation Displacement Connection (IDC) technology using superior materials and best manufacturing practices.
A single crimp displaces the insulation and provides a cold solder equivalent connection, delivering low contact resistance.
Environmentally sealed UY4 Wire Connectors can endure extreme and harsh climatic conditions with reliability you can depend on for 40 or more years.

UY4 C for water resistant splicing
Pre-filled with sealant, the connector offers excellent resistance to high 
humidity, condensation and exhibits 
good resistance to water penetration.

UY4 CD
For non-pressurized cable splicing
Dry version of UY4 C, the connector is specifically made for non-pressurized joints with air core cables or for special applications.

          Features

• The UY4 C connectors permits repeated re-entry, 20 times or more, without reducing the performance of the joints, leading to substantial reduction of repair or rework cost.

• The connector can be used for “Straight”, “Tap or Bridge” splicing applications.

• Unlike Butt splicing, the In-Line splicing reduces the splice bundle size substantially, thereby saving in your costly closure requirement.

• Pre-filled with sealant the connector offers excellent resistance to moisture and water penetration.

• Pre-crimp feature prevents slipping of conductors after positioning in the connector, reduces craftsman’s fatigue and saves time.

• The connector accepts solid copper conductors from 0.32 to 0.65 mm with max insulation diameter of 1.65 mm.

• No special tools are required for splicing operation.

• Built-in strain relief provides excellent resistance to torsion and bending at the splice joint.

Teklite™ Self Stripping Dropwire Connectors

Application

Use the Teklite Self Stripping Dropwire Connectors to electrically connect two dropwire legs, insulate the connection and provide moisture protection.

Wire Range

22-16 AWG (0.6 - 1.29 mm) solid, tinned or untinned copper conductors. For use with common thermoplastic insulated dropwire, with a maximum insulation diameter of .120 inches (3.0 mm).

Construction